Optical Fiber Cable Flexing Testing Machine
Product description:
Optical Fiber Cable Flexing Testing MachineOverview
GNZ-1000 Series Optical Fiber Cable Flexing Testing Machine is intended to establish the ability of a fiber optic cable to withstand mechanical repeated flexing in service, e.g. elevator cable.
Sample
The sample shall be terminated at each end in a connector, or in a manner such that the fibres, sheaths and any strain members are clamped together in a representative manner. It shall be of a length sufficient to carry out the specified test.
Apparatus
The pulleys shall have a semicircular shaped groove for circular cables and a flat groove for flat cables. The restraining clamps D shall be fixed so that the pull is always applied by the weight from which the carriage is moving away. An equivalent apparatus may be used, for example that shown in IEC 60227-2.
Technical Parameter
Items
Index
Carriage stroke
1000mm
Maximum cycles
9999
Speed setting range
250~350mm/s
Power
0.75kW
Temperature
10℃~40℃
Humidity
Less than 80%